Best Tanning Solution in UK

How to Mix and Use Melanotan 2 from Turbo Tan

It is important to use a high quality product correctly for better results. That is why we have put together this complete guide on how to use Melanotan 2 to help you get the most from your investment with the least likelihood of side effects. If you have any questions, please do not hesitate to contact us. This guide is intended for informational purposes only and should not be considered medical advice, as per our terms and conditions.

Our Best Products

Let's Know

How to Mix MT2 Vials

Melanotan 2 comes in two separate vials that have to be diluted to create one solution. It is easy to mix Melanotan 2, but there are some rules that are necessary to follow for the product to be most effective. Below is a step by step guide on how to mix the product for the best results.

1. Remove the Yellow Cap

Pull off the yellow cap from the Melanotan 2 injection vial

2. Clean the Vials

Use the included alcohol wipes to clean the surfaces of both vials

3. Prepare the Water

Clean the surface of the water vial with an alcohol wipe

4. Fill the Syringe

Take the syringe out of its packaging, insert the needle into the side of the water vial, and fill the syringe with 1 ml of water (some users add an extra 0.25 ml of water to reduce initial side effects)

5. Inject the Water

Slowly inject the water into the Melanotan 2 vial by inserting the needle through the center of the grey cap (use the raised circle on the cap as a guide; if you encounter resistance, adjust the needle slightly off-center)

6. Add Additional Water

If adding another 0.25 ml of water, repeat the previous step. For nasal spray, use 2 full syringes of water per vial

7. Mix the Solution

Gently roll the Melanotan 2 vial between your fingers to help it dissolve into a solution (never shake the vial)

8. Store the Solution:

Once mixed, store the vial upright in the fridge until ready to use

Note: Once opened, any remaining water cannot be kept and should be discarded.

Get Now

Let's Know

More information About Melanotan 2

Mixing for Nasal Spray

For nasal spray, follow the steps above but use 2 full syringes of water per vial. Draw the solution out of both vials and gently place it into the nasal spray bottle.

Storage

The mixed Melanotan 2 solution can be stored in the fridge for up to six months (keep vials upright). The unmixed product has a shelf life of about 12 months when kept in a cool, dark place.

Reducing Side Effects

For those with a low tolerance to tanning injections, consider micro-dosing 0.05 ml (1/20th of a syringe) for the first 3-4 days, or doubling the amount of water when mixing the solution to reduce side effects.

Syringe Type

If you purchase a kit, it will include the correct syringes. If buying separately, you need an ultra-fine 1 ml fixed needle syringe, either 29g or 30g (g measures the thickness of the needle).

Let's Know

How to Use Melanotan 2 Tanning Injections

When you are ready to use Melanotan 2 tanning injections, make sure that you have the mixed MT2 solution, a syringe, and alcohol swabs available. Here are six steps to help you finish the injection process:

1. Prepare the Syringe

Take the mixed MT2 vial. Insert the syringe needle through the center of the grey cap, as done when filling the vial with water

2. Fill the Syringe

Pull back the plunger to draw 0.1 ml of the mixed solution into the syringe (this is the first main marker, approximately 1/10th of the syringe)

3. Clean the Injection Site

Locate a spot on your belly, a few centimeters away from the navel, and clean it with an alcohol swab.

4. Pinch the Skin

Pinch 1-2 cm of your tummy fat tissue, about four fingers distance from your belly button, to avoid injecting too deeply

5. Administer the Injection:

: Insert the needle at a 90-degree angle into the pinched area. If you are slim with little fatty tissue, insert the needle at a 45-degree angle to ensure you do not go through the subcutaneous layer. Administer the entire 0.1 ml of the solution before withdrawing the needle.

6. Complete the Injection:

You have now successfully taken your first MT2 injection.

Note:Individuals with a low tolerance may prefer to micro-dose 0.05 ml (1/20th of a syringe) for the first 3-4 days or double the water amount when mixing the solution to minimize side effects.

Get Now

The Right Melanotan 2 Dosage

For the best outcome, use Melanotan 2 consistently, but do not use it more than once a day. We suggest that you take no more than 0.1 ml (1/10 of a syringe) each night before bedtime to minimize the side effects. You may notice your freckles turning darker after about the fourth injection. This means that the solution is active in your system, and very pale individuals might see this effect a few days later. This means that UV exposure is needed to activate Melanotan 2. Nightly injections and other day’s exposure to UV light should follow until the desired skin tone is achieved. When you have reached your goal, decrease the use of MT2 to one dose per week and extend the time between sunbathing.

If you have any questions before using or mixing Melanotan 2, please feel free to contact us. We are always happy to assist you and welcome your feedback!

Get Now